Design principles of solar panel kit for greenhouse

Comments · 340 Views

The design principle of the solar panel kit for shed is to meet the daily power consumption of the load under the average weather conditions (solar radiation), that is, the annual power generation of the solar cell module should be equal to the annual electricity consumption of the load.

The design principle of the solar panel kit for shed is to meet the daily power consumption of the load under average weather conditions (solar radiation), that is, the annual power generation of the solar cell module should be equal to the annual electricity consumption of the load. Because the weather conditions are below and above average, solar cell modules should be designed to meet the needs of the season with the worst light and the minimum amount of solar radiation. If it is designed only according to the average value, it is bound to cause continuous power loss of the battery in the worst lighting season of more than 1/3 hours of the whole year. If the battery is in a state of power deficit for a long time, the plate of the battery will be sulfated, and the service life and performance of the battery will be greatly affected. The follow-up operation cost of the whole system will also be greatly increased. The solar cell module should not be designed too large in order to charge the battery as quickly as possible so that the power generation of the solar cell will be much larger than the load for most of the year, resulting in the waste of solar cell modules and the overall cost of the system is too high. Therefore, the best way to design a solar panel kits for sheds is to make solar modules basically meet the needs of the worst seasons, that is, the batteries can be fully charged every day in the worst seasons.

In some areas, the illuminance in the worst season is much lower than the annual average, and if the power of solar modules is designed in the worst case, it will generate far more electricity than is actually needed for the rest of the year. At this time, it can only be considered to appropriately increase the design capacity of the battery and increase the electric energy storage, so as to make the battery in a shallow discharge state and make up for the damage caused by the lack of power generation in the worst season. Where there are conditions, we can also consider taking measures such as wind power and solar power to complement each other and city electricity to complement each other, so as to achieve the best overall cost-effectiveness of the system.

The solar panel kit for shed is designed to meet the average daily power consumption of the load, so the basic method of designing and calculating the size of the solar cell module is to use the average daily power consumption of the load (unit: a ·h or wh) as the basic data, and take the local solar radiation resources parameters, such as peak sunshine hours, annual total radiation and other data as reference. It is obtained by comprehensive calculation combined with the data or coefficients of some related factors.

There are generally two methods for designing and calculating solar cell modules or assembly arrays. One method is to directly calculate the power of the solar cell module or square matrix according to the above data, select or customize the corresponding power battery module according to the calculation results, and then get the shape size, and installation size of the battery module. This method is generally suitable for the design of small and medium-sized photovoltaic power generation systems. Another method is to first select the battery module whose size meets the requirements, and design and calculate the series, parallel and total power of the battery module according to the data of peak power, peak working current, and daily power generation. This method is suitable for the design of medium and large photovoltaic power generation systems.

There are two main factors related to the power generation of solar cell modules.

  1. The power of the solar cell module decays. In the practical application of a photovoltaic power generation system, the output power (power generation) of solar cell modules will attenuate or decrease due to the influence of various internal and external factors. For example, the conversion efficiency of an AC inverter should be considered in AC systems for various non-quantifiable factors, such as dust cover, power decline of components, line loss, and so on. Therefore, when designing, the various factors that cause the power decline of the battery module should be calculated according to 10% loss, and if it is an AC photovoltaic power generation system, the loss of conversion efficiency of the AC inverter should also be taken into account. In fact, these are the safety factors that need to be considered in the design of the photovoltaic system, and there is a reasonable margin for the battery module in the design, which is the guarantee of the long-term normal operation of the system year after year.
  2. The charge and discharge loss of the battery. In the process of charging and discharging the battery, the current generated by the solar cell will cause certain losses due to the heating and evaporation of electrolytic water in the process of conversion and storage. that is to say, the charging efficiency of the battery is generally only 90% and 95% according to the difference of the battery. Therefore, in the design, the power of the battery module should be increased by 5% ~ 10% according to the difference of the battery, in order to offset the dissipation loss in the process of battery charge and discharge.

 

Comments